1. After the installation of the machine according to the requirements, before using the machine, you need to refer to the operation manual in detail to be familiar with the structure of the machine and the functions of the switches and buttons of each electric box. It should be operated by those who are familiar with the technological process, so that timely measures can be taken to prevent accidents in the process of commissioning.
2. Before starting the machine, check whether the lines are connected correctly and whether the water and electricity supply is normal.
3. Gear lubricating oil needs to be added into the gearbox (generally, it has been added at the time of production by the company). The amount of oil added should be based on the oil that can be seen by the liquid level meter, not too little or too much. Check whether the oil pump works normally.
4. When using the new machine, first heat the machine to the required temperature.
5. When the machine is out of service, first open the waste valve to drain all the materials in the box. When the pressure of the box drops, close the scraper switch and waste discharge switch, then turn off the motor of the hydraulic station, turn off the switches of each heating area, and then turn off the main power switch.
